Product introduction
The normal buffer working conditions allow an allowable angular angle of impact within ±25°, but if it exceeds this range, the torque experienced by the piston rod will be greatly increased, resulting in bending deformation of the buffer piston rod. Users can choose CJAC SLA angle adapter, which is suitable for occasions where the eccentric angle is too large, and the bearing range is effectively widened to achieve flexible damping effect at the end of the non-linear impact traverse, which improves the stability of product use. Eg.SLA (8, 10, 12) can withstand a 12.5° angling impact, and SLA (14, 20, 25) can withstand a 25° angling impact.
Performance parameter
Positioning locknut
| Model | SC08 | SC10 | SC12 | SC14 | SC20 | SC25 | SC25-25L | SC25-65L | SC27 | SC36 |
|---|---|---|---|---|---|---|---|---|---|---|
|
A (mm) | - | - | - | - | - | - | - | - | - | - |
|
B (mm) | - | - | - | - | - | - | - | - | - | - |
|
D (mm) | - | - | - | 18 | 25 | 31.3 | 31.3 | 31.3 | 31.3 | 45 |
|
H (mm) | - | - | - | - | - | - | - | - | - | - |
|
K (mm) | - | - | - | - | - | - | - | - | - | - |
|
L (mm) | 14 | 16 | 20 | 27 | 35 | 45 | 25 | 65 | 45 | 80 |
| M | M8xP1.0 | M10xP1.0 | M12xP1.0 | M14xP1.5 | M20xP1.5 | M25xP1.5 | M25xP1.5 | M25xP1.5 | M27xP1.5 | M36xP1.5 |
|
W (mm) | 11 | 12.7 | 14 | 19 | 26 | 32 | 32 | 32 | 32 | 46 |
|
Weight (g) | - | - | - | - | - | - | - | - | - | - |
| Corresponding illustration | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Model | F36 | F42 | F64 | F85 |
|---|---|---|---|---|
|
A (mm) | 45 | 45 | 55 | 75 |
|
B (mm) | 45 | 45 | 55 | 75 |
|
D (mm) | 8.5 | 8.5 | 10.5 | 13.5 |
|
H (mm) | 16 | 16 | 16 | 19 |
|
K (mm) | 41 | 41 | 70 | 76.2 |
|
L (mm) | - | - | - | - |
| M | M36xP1.5 | M42xP1.5 | M64xP2.0 21/2-12UNF | M85xP2.0 |
|
W (mm) | 60 | 60 | 89 | 101.6 |
|
Weight (g) | 282 | 236 | 540 | 590 |
| Corresponding illustration | 1 | 1 | 1 | 2 |