Product introduction
AS Series
AS series air springs can be applied in mechanical shock, vibration, pressure, handling, and actuation. This product has small installation space requirements and features simple control load. It can be used to replace the jack, with the cylinder to provide thrust force.
-
MaterialEnd cap：Galvanized carbon steel and nickel plating treatment increase rust resistance
Rubber bag：neoprene plus fiber braid -
Frequency3.0~5.0Hz
-
Air pressure range0~0.5Mpa
-
InstallationCJAC provides you with standard threaded mounting installation, which can be fixed in both internal and external teeth. If you have specific demands, CJAC can also offer custom offers.
-
Specific demandsCJAC is able to customize solutions based on your requirements.
Performance parameter
AS-130-1~AS-130-2N
| Model | AS-130-1 | AS-130-1N | AS-130-2 | AS-130-2N |
|---|---|---|---|---|
|
Stroke (mm) | 56 | 56 | 98 | 98 |
|
Lowest height (mm) | 44 | 44 | 54 | 54 |
|
Tallest height (mm) | 100 | 100 | 152 | 152 |
|
Standard height SH (mm) | 50 | 50 | 84 | 84 |
| Working range | 56 | 56 | 98 | 98 |
| Maximum outer diameter when it is pressurized | 200 | 200 | 200 | 200 |
|
Internal area coverage (approximate value of standard height and pressurized 5 bar) (τ) | 0.25 | 0.25 | 0.52 | 0.52 |
|
Loading capability (approximate value of standard height and pressurized 5 bar) (Kg) | 440 | 440 | 440 | 440 |
|
Natural frequency (approximate value of standard height and pressurized 5 bar) (Hz) | 4.7 | 4.7 | 3.3 | 3.3 |
| Mounting block diameter 5bar | 104 | 104 | 104 | 104 |
|
Maximum diameter (mm) | 142 | 142 | 142 | 142 |
|
P.C.D (mm) | \ | \ | \ | \ |
|
Vent holes (E) | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT |
| Fixing bolt / thread blind hole specifications | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 |
| Fixing bolt / thread blind hole numbers | 2 | 2 | 2 | 2 |
| Model | AS-135-1 | AS-135-1N | AS-135-2 | AS-135-2N | AS-155-2 | AS-155-2N | AS-180-1 | AS-180-2 | AS-180-3 |
|---|---|---|---|---|---|---|---|---|---|
|
Stroke (mm) | 35 | 35 | 45 | 45 | 100 | 100 | 35 | 95 | 180 |
|
Lowest height (mm) | 55 | 55 | 100 | 100 | 75 | 75 | 65 | 90 | 120 |
|
Tallest height (mm) | 90 | 90 | 145 | 145 | 175 | 175 | 100 | 185 | 300 |
|
Standard height SH (mm) | 80 | 80 | 135 | 135 | 155 | 155 | 90 | 185 | 260 |
| Working range | 35 | 35 | 45 | 45 | 100 | 100 | 180 | 95 | 95 |
| Maximum outer diameter when it is pressurized | 140 | 140 | 140 | 140 | 160 | 160 | \ | 180 | 180 |
|
Internal area coverage (approximate value of standard height and pressurized 5 bar) (τ) | \ | \ | \ | \ | \ | \ | 1,000 | \ | \ |
|
Loading capability (approximate value of standard height and pressurized 5 bar) (Kg) | 660 | 600 | 600 | 600 | 795 | 795 | \ | 1,000 | 1,000 |
|
Natural frequency (approximate value of standard height and pressurized 5 bar) (Hz) | \ | \ | \ | \ | \ | \ | - | \ | \ |
| Mounting block diameter 5bar | 109.5 | 109.5 | 109.5 | 109.5 | 109.5 | 109.5 | 133 | 133 | 133 |
|
Maximum diameter (mm) | 140 | 140 | 140 | 140 | 160 | 160 | 180 | 180 | 180 |
|
P.C.D (mm) | 44.5 | 44.5 | 44.5 | 44.5 | 44.5 | 44.5 | 69 | 69 | 69 |
|
Vent holes (E) | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT |
| Fixing bolt / thread blind hole specifications | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 | 3/8"-19 |
| Fixing bolt / thread blind hole numbers | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Model | AS-147-2 | AS-147-2N | AS-160-1 | AS-160-1N | AS-160-2 | AS-160-2N | AS-160-3 | AS-160-3N | AS-210-1 | AS-210-1N | AS-210-2 | AS-210-2N | AS-210-3 | AS-210-3N | AS-250-1 | AS-250-1N | AS-250-2 | AS-250-2N | AS-250-3 | AS-250-3N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Stroke (mm) | 145 | 145 | 56 | 56 | 106 | 106 | 156 | 156 | 77 | 77 | 168 | 168 | 245 | 245 | 112 | 112 | 160 | 160 | 279 | 279 |
|
Lowest height (mm) | 71 | 71 | 44 | 44 | 62 | 62 | 80 | 80 | 48 | 48 | 70 | 70 | 95 | 95 | 50 | 50 | 78 | 78 | 106 | 106 |
|
Tallest height (mm) | 216 | 216 | 100 | 100 | 168 | 168 | 236 | 236 | 125 | 125 | 238 | 238 | 340 | 340 | 162 | 162 | 238 | 238 | 385 | 385 |
|
Standard height SH (mm) | 152 | 152 | 70 | 70 | 104 | 104 | 174 | 174 | 80 | 80 | 140 | 140 | 200 | 200 | 92 | 92 | 160 | 160 | 232 | 232 |
| Working range | 145 | 145 | 56 | 56 | 106 | 106 | 156 | 156 | 77 | 77 | 168 | 168 | 245 | 245 | 112 | 112 | 160 | 160 | 279 | 279 |
| Maximum outer diameter when it is pressurized | 162 | 162 | 176 | 176 | 176 | 176 | 176 | 176 | 230 | 230 | 230 | 230 | 230 | 230 | 270 | 270 | 270 | 270 | 270 | 270 |
|
Internal area coverage (approximate value of standard height and pressurized 5 bar) (τ) | 0.96 | 0.96 | 0.4 | 0.4 | 0.82 | 0.82 | 1.26 | 1.26 | 0.4 | 0.4 | 0.82 | 0.82 | 1.26 | 1.26 | 2.6 | 2.6 | 5.4 | 5.4 | 8.4 | 8.4 |
|
Loading capability (approximate value of standard height and pressurized 5 bar) (Kg) | 500 | 500 | 510 | 510 | 510 | 510 | 510 | 510 | 1,000 | 1,000 | 1,000 | 1,000 | 1,000 | 1,000 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 | 1,500 |
|
Natural frequency (approximate value of standard height and pressurized 5 bar) (Hz) | 2.8 | 2.8 | 4.1 | 4.1 | 2.9 | 2.9 | 2.6 | 2.6 | 4.1 | 4.1 | 2.9 | 2.9 | 2.6 | 2.6 | 3.0 | 3.0 | 2.1 | 2.1 | 2.0 | 2.0 |
| Mounting block diameter 5bar | 108 | 108 | 120 | 120 | 120 | 120 | 120 | 120 | 150 | 150 | 150 | 150 | 150 | 150 | 168 | 168 | 168 | 168 | 168 | 168 |
|
Maximum diameter (mm) | 162 | 162 | 176 | 176 | 176 | 176 | 176 | 176 | 230 | 230 | 230 | 230 | 230 | 230 | 270 | 270 | 270 | 270 | 270 | 270 |
|
P.C.D (mm) | 44.45 | 44.45 | 44.45 | 44.45 | 44.45 | 44.45 | 44.45 | 44.45 | 69.9 | 69.9 | 69.9 | 69.9 | 69.9 | 69.9 | 88.9 | 88.9 | 88.9 | 88.9 | 88.9 | 88.9 |
|
Vent holes (E) | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT | 1/4"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 3/8"PT | 1/2"PT | 1/2"PT | 1/2"PT | 1/2"PT | 1/2"PT | 1/2"PT |
| Fixing bolt / thread blind hole specifications | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 | M10xP1.5 |
| Fixing bolt / thread blind hole numbers | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |